Ultrasonic Cleaning Machines


image

Optional Features :
•Digital Temperature Controller with set/actual value.
• Low Noise Ultrasonic Baths below 70 db with certificate from Government Approved Agency. This unique feature allows the user to use this machine in a closed environment (A.C) without being disturbed. Thus these machines are more user friendly.
• Multifire : Texonics has introduced a Multiple Frequency Ultrasonic Cleaner for the toughest, rigorous and hi-tech parts of industries. Multifire uses transducers operating at multiple frequencies simultaneously. This process eliminates Dead Spots completely and gives you the best impact and penetrative cleaning effect. (NO DEAD ZONES).
• High Temperature Bath up to 900 C for much tougher contaminant cleaning.

INDUSTRIAL MULTISTAGE ULTRASONIC SYSTEMS :
CLEANING :
TEXONICS cleaning is accomplished in the first tank. This tank is equipped with either 40 KHz or 25 KHz industrials Ultrasonic, and incorporates thermostatically controlled heat.

JET RINSING :
The rinse position includes industrial ultrasonic components as standard to assure that all soils and cleaning chemistry are driven from blind holes and crevices before the dry cycle.

DRYING :
The forced hot air drying station utilizes evaporation, one of the most common drying techniques to remove water. Room air is heated to above 850 C, which enables it to absorb moisture from the parts.

Single stage cleaning systems : Two standard models :

Model no UDC 750 UDs 1500
Dimension 450x600x800 mm 800x600x800 mm SS/FRP/MS
Tank Dimension 350x350x400 mm 700x400x400 mm. (S.S)
Capacity 40 Litres 80 Litres
Frequency 27,000. KHz. 27,000. KHz
Ultrasonic power 750 Watts. 1500 Watts.
Weight 50 Kgs 100 Kgs.
Generator Solid State Solid State
Accessory

Drain hose (2 Meters)

Basket 1 nos.

Drain hose (2 Meters)

Basket 1 nos.

Power Supply 230 Volts/50 Hz. 230/415 Volts/50 Hz.
Heater 1000 Watts. 2000 Watts.


LAB MODELS :
SPECIFICATIONS :
L X W X D = 330 X 260 X 100 MM 6.0 LTRS
L X W X D = 330 X 260 X 150 MM 10.0 LTRS
L X W X D = 330 X 260 X 200 MM 14.0 LTRS

APPLICATIONS :
Used in cleaning Laboratory Instruments, Slides, Test Tubes, Sieves, Pipette.

ENDOSCOPIC & LAPROSCOPIC MODELS :
SPECIFICATIONS :
L X W X D = 530 X 330 X 100 MM 16.0 LTRS
L X W X D = 530 X 330 X 150 MM 20.0 LTRS
L X W X D = 530 X 330 X 200 MM 24.0 LTRS

APPLICATIONS :
Used in Opeation Theatres for cleaning endoscopic, laproscopic, Rigid Orthopedic instruments, & Catheter's.

OPD MODELS :
SPECIFICATIONS :
L X W X D = 330 X 160 X 63 MM 2.5 LTRS
L X W X D = 330 X 160 X 100 MM 3.5 LTRS
L X W X D = 330 X 160 X 150 MM 4.5 LTRS

APPLICATIONS :
Used in OUT PATIENT DEPARTMENTS.

OPTICAL & DENTAL MODELS :
SPECIFICATIONS :
L X W X D = 260 X 160 X 63 MM 16.0 LTRS
L X W X D = 260 X 160 X 100 MM 20.0 LTRS
L X W X D = 260 X 160 X 150 MM 24.0 LTRS

APPLICATIONS :
Used in cleaning OPTICAL LENSES & DENTAL INSTRUMENTS.

METAL CLEANING SYSTEMS :
Texonics Metal Cleaning System is a three / four stage, fully-configured ultrasonic cleaning, rinsing and drying system.

TABLE TOP CLEANING SYSTEM :
Texonics Table Top Cleaning System is a three / four stage, fully-configured ultrasonic cleaning, rinsing and drying system.